.Shown in White with optional Anodized Full-View window
		COLORS
		White
		Brown
		Sandstone
		Silver
		Please refer to samples at your local C.H.I. Distributor for exact color match.

SPECIFICATIONS

SECTIONS

Sections are available in: 20 gauge white 24 gauge white, brown, silver, and sandstone 26 guage white Stiles are box-shaped and galvanized Section joints are tongue-and-groove Inside stiles are made of galvanized steel and stile holes are "dimpled" for increased holding power Bottom astragal is "U" type with an aluminum retainer Stiles are face-riveted vs. glued

TRACKS

Tracks are 2" or 3", as specified Available in bracket mount, angle mount, clip angle mount, 12" radius, 15" radius, high lift, vertical lift, follow roof line, or dual track low head room

HARDWARE

Package includes 11 gauge or 14 gauge hinges, as specified 2" or 3" long-stem or short-stem steel rollers with 10 ball bearings Heavy duty adjustable top roller brackets

SPRINGS

Torsion springs are helically wound with oil-tempered wire All springs are individually calibrated for each door All tubes are galvanized for rust resistance

INSULATION TYPE

Polystyrene with high impact vinyl back cover Polystyrene with 27 gauge steel back cover Stiles include special clips to hold insulation retainer in position Insulated doors have an R-value of 6.81

Larger doors come standard with double-end hinges and long-stem rollers for smooth operation and long life.	The face skin is attached to the box stiles using semi-tubular rivets vs. adhesives for added rigidity.
Section joints on all C.H.I. doors are tongue-and-groove for a tighter weatherseal and structural rigidity.	Box type stiles include unique tabs to keep insulation retainer clips tight against the stiles.
Extra-heavy bottom brackets are included on larger door sizes.